Wood Block Stacker
Designed by Jenny Newman
All Rights Reserved
If you like this craft, you may enjoy:
Craft Paint- Navy, Green, and Off White
Three 1 1/2" blocks
Vinyl or sticker lettering
Hand Sander or Sand paper
Step 1: Using a chop saw, cut 2" blocks from a 2x4 board to measure 5x5, 5x7, and 5x9 and sand edges. If you do not feel comfortable using a saw, most Hardware stores will cut wood for you or you can buy blocks already cut at most craft stores that sell craft wood.
Step 2: Paint blocks and set aside to let dry. When paint is completely dry hand sand edges with sand paper and wipe dry with cloth.
Step 3: Apply vinyl and smooth out any air bubbles with a squeegee- making sure to apply left to right and work down. Once vinyl is applied- tie a ribbon around and display!