Ribbon Picture Display
Ribbon Picture Display
Ribbon Craft Idea
Designed by Jenny Newman
All Rights Reserved
If you like this craft idea, you may also enjoy:
Difficulty: Easy
Materials:
Ribbon
5x7 picture frames
Photos
Glue gun
Scissors
Instructions
Step 1: For this project I didn't have a ribbon thick enough on hand that I liked so I used a curtain tie back that was no longer in use but I would recommend a wider ribbon for this craft as it will be sturdier and hang better. To start, You will want to arrange ribbon and frames out before cutting the ribbon. You can determine the length depending on how many photos you want to display and how far in between each photo, etc. Make sure to leave enough length to tie a bow at the top to hang.

Step 2: Once ribbon is cut it is time to glue. If you don't want to eyeball it, you can mark the ribbon where each picture goes with chalk as it can be easily wiped off when finished. Glue each picture in place with hot glue gun and let dry before moving.

Step 3: Now it is time to get it ready to hang. Before lifting or moving, you will want to make sure the glue is dry before moving the ribbon at all or your picture frames will end up slightly crooked. To hang, tie a bow at the top or if you want a straight edge you can fold the top of the ribbon down and glue to seam. Hang with a small nail or frame hook. Enjoy!








