|
Christmas Craft Projects - Calico Bells
Lovely, country, calico bells pattern. Kindly
contributed by designer: Ashley Winston
Materials: 2/3 yard blue calico fabric; 1/2 yard yellow calico fabric; 1/4 yard red and white polka dot fabric;
Red and yellow felt; Fusible webbing or glue; 6 ounces polyester stuffing; Plastic curtain ring.
Directions:
Enlarge the patterns (Click
here for Patterns) and cut the pieces from
folded fabric: cut the back and front of the outer bells from blue fabric, the
center bell from yellow, and the bow front and streamers from red polka dot
fabric. Cut trims, including 1/2-inch stripes, from felt, as shown in the
photograph above.
Stitch along the seam line on the lower edge
of the bow front. Turn under the seam allowance, clipping wherever necessary to
make it lie flat. Press. Top-stitch the lower edge of the bow front to the top
of the outer bell front, matching the seam lines. Press again and set aside.
Sew together 2 sets of bow streamers, right
sides facing, leaving an opening between dots, as shown on the pattern. Clip
curves, turn, and press. Stuff lightly. With the raw edges even, pin the
streamers to the outer edges of the bow front just above the lower seam line.
Baste in place.
Fuse or glue felt stripes along the lower
edges of the bells, 1/2 inch above the seam line. Outline the long edges with
machine stitching, using matching thread.
Fuse and stitch the clappers and curved trim
at the top of the center bell, with the curved edges on the seam line. Set aside
the yellow center bell.
With right sides together and streamers tucked
inside, sew together the front and back of the outer bells, leaving the seam
open between dots. Clip curves, turn, and stuff
lightly. Slip-stitch the opening closed. Outline the bow knot with a running
stitch either on the machine or by hand, as shown on the pattern.
With right sides together, stitch the front of
the center bell to the back. Leave an opening for turning. Clip curves, turn right side out, and stuff lightly.
Slip-stitch the opening closed.
Hand-stitch the center bell in place on top of the double
bells. For a hanger, sew a plastic ring to the back of the bow.
Back
|
Unleash Your Creativity